CSN ON 42 5634-1964 《钢筋 类型11热轧用于梳子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E782-1995(2015) 4500 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode《条件模拟操作模式下太阳能集电器覆.pdf

ASTM E783-2002 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors《现场测量安装的外门窗漏气性的标准试验方法》.pdf

ASTM E783-2002(2010) 8750 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors《通过已安装的外窗户和门现场测量空气泄漏的标准试验方法》.pdf

ASTM E784-1989(2005) Standard Specification for Clamps Utility Laboratory and Holders Buret and Clamp《实验室通用夹件和夹架、滴定管和夹件标准规范》.pdf

ASTM E784-1989(2011) 2500 Standard Specification for Clamps Utility Laboratory and Holders Buret and Clamp《实验室通用夹具 以及滴定管、夹具固定器的标准规格》.pdf

ASTM E784-1989(2017) 0858 Standard Specification for Clamps Utility Laboratory and Holders Buret and Clamp《实验室通用夹件和夹架 滴定管和夹件标准规格》.pdf

ASTM E785-1981(2006) Standard Specification for Crucibles Ignition Laboratory Metal《实验室灼烧金属坩锅》.pdf

ASTM E785-1981(2011) 8750 Standard Specification for Crucibles Ignition Laboratory Metal《实验室灼烧金属坩锅的标准规格》.pdf

ASTM E785-1981(2017) 7438 Standard Specification for Crucibles Ignition Laboratory Metal《实验室灼烧金属坩锅》.pdf