CSN ON 44 5183-1962 《制动电机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G11-2004 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings《室外气候老化对管道涂层的影响的标准试验方法》.pdf

ASTM G11-2004(2012) Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings《管道涂层受室外气候影响的标准试验方法》.pdf

ASTM G110-1992(2003)e1 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Sol.pdf

ASTM G110-1992(2009) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solut.pdf

ASTM G110-1992(2015) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride&x2009 +&x2009 Hydrogen Pe.pdf

ASTM G111-1997(2006) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment or Both《高温或高压环境中或高温高压环境中的腐蚀试验》.pdf

ASTM G111-1997(2013) Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment or Both《高温 高压或高温高压环境下进行腐蚀试验的标准指南》.pdf

ASTM G112-1992(2003) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys《进行铝合金的剥离腐蚀试验》.pdf

ASTM G112-1992(2009) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys《进行铝合金的剥离腐蚀试验的标准指南》.pdf