1、Alarm systems - Alarm transmission systems and equipmentPart 7: Application guidelinesPD CLC/TS 50136-7:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06TECHNICAL SPECIFICATIONSPCIFICATION TECHNIQUETECHNISCHE SPEZIFIKATIONCLC/TS 50136-7September 2017ICS 13.320 Sup
2、ersedes CLC/TS 50136-7:2004 English VersionAlarm systems - Alarm transmission systems and equipment -Part 7: Application guidelinesSystmes dalarme - Systmes et quipements de transmission dalarme - Partie 7 : Guide dapplicationAlarmanlagen - Alarmbertragungsanlagen und -einrichtungen - Teil 7: Anwend
3、ungsregelnThis Technical Specification was approved by CENELEC on 2017-05-29.CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptlyat national level in an appropriate form. It is permissible to keep conflicting national st
4、andards in force.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
5、 Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-C
6、ENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. CLC/TS 50136-7:2017 ENational forewordThis Published Document is the UK implementation of CLC/TS 50136-7:2017.The UK partic
7、ipation in its preparation was entrusted to Technical Committee GW/1, Electronic security systems and products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Us
8、ers are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91874 2ICS 13.320Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of
9、 the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CLC/TS 50136-7:2017TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50136-7 September 2017 ICS 13.320 Supersedes CLC/TS
10、 50136-7:2004 English Version Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines Systmes dalarme - Systmes et quipements de transmission dalarme - Partie 7 : Guide dapplication Alarmanlagen - Alarmbertragungsanlagen und -einrichtungen - Teil 7: Anwendungsregeln
11、 This Technical Specification was approved by CENELEC on 2017-05-29. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards
12、 in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt
13、a, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-C
14、ENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50136-7:2017 E PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 2 Contents Page European foreword 4 Introduction 5 1 S
15、cope . 6 2 Normative references . 6 3 Terms and definitions 6 4 Abbreviations 6 5 General . 7 5.1 Information security . 7 5.1.1 General . 7 5.1.2 Key management 7 5.1.3 Access to the ATS and ATSN 7 5.1.4 Security screening 7 5.2 Availability . 8 5.2.1 General . 8 5.2.2 Single path ATS availability
16、. 8 5.2.3 Dual path ATS availability 8 5.3 Testing . 10 5.4 Certification and inspection 10 5.5 The role of the ATSP 11 5.6 ATS applications . 11 5.7 Alternative notification services . 11 5.8 MCT and hosted RCT . 11 5.9 Service level agreements . 12 5.9.1 General . 12 5.9.2 Topics of a Service Leve
17、l Agreement . 12 5.10 Documentation 13 6 Planning . 13 6.1 General . 13 6.2 Selection of ATS and/or ATSN category 13 6.3 Service level agreements . 13 6.4 Roles and responsibilities . 13 6.5 Connection to alarm systems 13 7 Design 14 7.1 Non-ATE equipment . 14 7.2 Shared transmission links and throu
18、ghput . 14 7.2.1 General . 14 7.2.2 Recommendations 15 7.3 Transmission network selection . 15 7.4 Interoperability 15 7.4.1 Protocols . 15 7.4.2 PSTN alarm reporting protocols . 15 7.4.3 VoIP systems . 16 7.4.4 IP Alarm reporting protocols . 16 7.4.5 Interconnections . 16 7.5 Location of SPT and ot
19、her transmission network equipment . 16 7.6 Design examples. 16 PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 2 Contents Page European foreword 4 Introduction 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions 6 4 Abbreviations 6 5 General . 7 5.1 Information security . 7 5.1.1 General
20、 . 7 5.1.2 Key management 7 5.1.3 Access to the ATS and ATSN 7 5.1.4 Security screening 7 5.2 Availability . 8 5.2.1 General . 8 5.2.2 Single path ATS availability . 8 5.2.3 Dual path ATS availability 8 5.3 Testing . 10 5.4 Certification and inspection 10 5.5 The role of the ATSP 11 5.6 ATS applicat
21、ions . 11 5.7 Alternative notification services . 11 5.8 MCT and hosted RCT . 11 5.9 Service level agreements . 12 5.9.1 General . 12 5.9.2 Topics of a Service Level Agreement . 12 5.10 Documentation 13 6 Planning . 13 6.1 General . 13 6.2 Selection of ATS and/or ATSN category 13 6.3 Service level a
22、greements . 13 6.4 Roles and responsibilities . 13 6.5 Connection to alarm systems 13 7 Design 14 7.1 Non-ATE equipment . 14 7.2 Shared transmission links and throughput . 14 7.2.1 General . 14 7.2.2 Recommendations 15 7.3 Transmission network selection . 15 7.4 Interoperability 15 7.4.1 Protocols .
23、 15 7.4.2 PSTN alarm reporting protocols . 15 7.4.3 VoIP systems . 16 7.4.4 IP Alarm reporting protocols . 16 7.4.5 Interconnections . 16 7.5 Location of SPT and other transmission network equipment . 16 7.6 Design examples. 16 CLC/TS 50136-7:2017 (E) 3 7.6.1 General . 16 7.6.2 ATSN using pass-throu
24、gh operation . 17 7.6.3 ATSN using store-and-forward operation . 18 8 Installation 18 8.1 Commissioning 18 8.2 Testing 18 8.2.1 General . 18 8.2.2 Test period . 19 8.2.3 Acceptance 19 8.2.4 Statement of conformance . 19 8.3 Fixing, fitting and cabling . 19 8.3.1 General . 19 8.3.2 Cabling . 19 8.4 C
25、ompetence . 20 8.5 Documentation 20 8.6 Certification 20 9 Operation 20 9.1 General . 20 9.2 Performance monitoring of the ATS and/or ATSN . 20 9.3 Change management 20 9.4 Configuration management 21 9.5 System upgrades . 21 9.6 Problem management . 21 9.7 Planned maintenance 21 9.8 End of life man
26、agement 22 9.9 Back-ups 22 PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 4 European foreword This document (CLC/TS 50136-7:2017) has been prepared by CLC/TC 79 “Alarm systems”. The following date is fixed: latest date by which this technical specification has to be announced at national level (doa)
27、20170829 This document supersedes CLC/TS 50136-7:2004. Annexes designated “informative” are given for information only. EN 50136 will consist of the following parts, under the general title “Alarm systems - Alarm transmission systems and equipment”: Part 1 General requirements for alarm transmission
28、 systems Part 2 General requirements for Supervised Premises Transceiver (SPT) Part 3 Requirements for Receiving Centre Transceiver (RCT) Part 4 Annunciation equipment used in alarm receiving centres Part 5 (Free) Part 6 (Free) Part 7 Application guidelines Part 8 (Free) Part 9 Requirements for a co
29、mmon protocol for alarm transmission using the Internet Protocol (IP) PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 4 European foreword This document (CLC/TS 50136-7:2017) has been prepared by CLC/TC 79 “Alarm systems”. The following date is fixed: latest date by which this technical specification h
30、as to be announced at national level (doa) 20170829 This document supersedes CLC/TS 50136-7:2004. Annexes designated “informative” are given for information only. EN 50136 will consist of the following parts, under the general title “Alarm systems - Alarm transmission systems and equipment”: Part 1
31、General requirements for alarm transmission systems Part 2 General requirements for Supervised Premises Transceiver (SPT) Part 3 Requirements for Receiving Centre Transceiver (RCT) Part 4 Annunciation equipment used in alarm receiving centres Part 5 (Free) Part 6 (Free) Part 7 Application guidelines
32、 Part 8 (Free) Part 9 Requirements for a common protocol for alarm transmission using the Internet Protocol (IP) CLC/TS 50136-7:2017 (E) 5 Introduction To give a common understanding of the requirements detailed in the EN 50136 suite of standards covering alarm transmission, there is a need for appl
33、ication guidelines to provide support to other TC 79 WGs, standardization bodies, insurance companies and customers, to understand what an appropriate performance for the alarm transmission system for a specific application should be. A full understanding of an application or application requirement
34、s are not always available to the alarm transmission experts, and therefore the following guidelines for the application of alarm transmission should assist the reader to understand the alarm transmission standards and the performance of an alarm transmission system. The EN 50136 suite of alarm tran
35、smission standards apply to many diverse applications e.g. I during the 4,5 % time period when ATP1 is in fault ATP2 is operationally 95,5 % available and 4,5 % unavailable. With the fault period of ATP1 (4,5 %) covered by ATP2 with 95,5 % availability the fault period expected from both paths reduc
36、es to 0,2 % providing a combined availability of 99,8 %. To enable the system to monitor the availability of an ATP to the required accuracy for the required availability measurement the minimum poll rate for DP2 should be better than 1 008 min (11 polls per week = 24 h * 7 days * 60 min * 10 %), an
37、d DP3 and DP4 should be 50 min (202 polls per week = 24 h * 7 days * 60 min * 4,5 %). Polling is a common method used to monitor ATP and/or ATS availability where the term polling means regular status message exchanges between an SPT and RCT(s). Other methods may be used to achieve the same results.
38、 Table 1 Examples of expected average allowed polling failures Requirements of EN 501361:2012 SP4 SP5 SP6 DP2 DP3 DP4 ATS Availability 7 day period 97,0 % 99,0 % 99,8 % 99,0 % 99,8 % 99,8 % Primary path Reporting time 3 min 90 s 20 s 30 min 3 min 90 s The following guidelines for polling result from
39、 the above: PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 10 Requirements of EN 501361:2012 SP4 SP5 SP6 DP2 DP3 DP4 Status message exchange (minimum) 3 min 90 s 20 s 30 min 3 min 90 s Minimum polls per week 3 360 6 720 30 240 336 3 360 6 720 Permitted lost polls 100 67 60 3 6 13 Indicative down time
40、 300 min 100 min 20 min 100 min 20 min 20 min Minimum ATP availability needed (if equal) 90,0 % 95,5 % 95,5 % Max down time 1 008 min 50 min 50 min Min polls per week 11 202 202 Alternative ATP availability Reporting time 25 h 25 h 5 h Status message exchange (minimum) 25 h 25 h 5 h Polls per week 6
41、 6 33 Permitted lost polls 0 0 0 Allowed down time 100 min 20 min 20 min NOTE 24 h * 7 days * 60 min * 10 %. 5.3 Testing While testing alarm transmission equipment (SPT and RCT) a test lab should test to demonstrate that the ATS is able to record and report availability at a level appropriate to the
42、 ATS category. 5.4 Certification and inspection Inspection and certification of an ATS and ATSN differs from single product certification in that the end to end ATS is to be certified, and should be carried out using a combination of product bench tests and commissioned system tests. To achieve comp
43、liance the following should be tested and/or documented during certification: the maximum number of connected ATSs for each category to the ATSN should be documented; the transmission delays and reporting times should be measured for at least ten random ATSs on each ATSN; the availability calculatio
44、n method and availability records should be inspected for at least ten random ATSs for each ATSN; the fault reporting should be verified for every mandatory fault for at least ten random ATSs for each ATSN; PD CLC/TS 50136-7:2017CLC/TS 50136-7:2017 (E) 10 Requirements of EN 501361:2012 SP4 SP5 SP6 D
45、P2 DP3 DP4 Status message exchange (minimum) 3 min 90 s 20 s 30 min 3 min 90 s Minimum polls per week 3 360 6 720 30 240 336 3 360 6 720 Permitted lost polls 100 67 60 3 6 13 Indicative down time 300 min 100 min 20 min 100 min 20 min 20 min Minimum ATP availability needed (if equal) 90,0 % 95,5 % 95
46、,5 % Max down time 1 008 min 50 min 50 min Min polls per week 11 202 202 Alternative ATP availability Reporting time 25 h 25 h 5 h Status message exchange (minimum) 25 h 25 h 5 h Polls per week 6 6 33 Permitted lost polls 0 0 0 Allowed down time 100 min 20 min 20 min NOTE 24 h * 7 days * 60 min * 10
47、 %. 5.3 Testing While testing alarm transmission equipment (SPT and RCT) a test lab should test to demonstrate that the ATS is able to record and report availability at a level appropriate to the ATS category. 5.4 Certification and inspection Inspection and certification of an ATS and ATSN differs f
48、rom single product certification in that the end to end ATS is to be certified, and should be carried out using a combination of product bench tests and commissioned system tests. To achieve compliance the following should be tested and/or documented during certification: the maximum number of conne
49、cted ATSs for each category to the ATSN should be documented; the transmission delays and reporting times should be measured for at least ten random ATSs on each ATSN; the availability calculation method and availability records should be inspected for at least ten random ATSs for each ATSN; the fault reporting should be verified for every mandatory fault for at least ten random ATSs for each ATSN; CLC/TS 50136-7:2017 (E) 11 where more tha
