CLSI EP05-A3-2014 Evaluation of Precisioin of Quantitative Measurement Procedures Approved Guideline - Third Edition.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 3098.11-2002 紧固件机械性能 自钻自攻螺钉.pdf

GB T 3098.12-1996 紧固件机械性能 螺母锥形保证载荷试验.pdf

GB T 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm.pdf

GB T 3098.14-2000 紧固件机械性能 螺母扩孔试验.pdf

GB T 3098.15-2014 紧固件机械性能 不锈钢螺母.pdf

GB T 3098.16-2014 紧固件机械性能 不锈钢紧定螺钉.pdf

GB T 3098.17-2000 紧固件机械性能 检查氢脆用预载荷试验 平行支承面法.pdf

GB T 3098.18-2004 紧固件机械性能 盲铆钉试验方法.pdf

GB T 3098.2-2000 紧固件机械性能 螺母 粗牙螺纹.pdf