CLSI NBS01-A6-2013 Blood Collection on Filter Paper for Newborn Screening Programs Approved Standard - Sixth Edition.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN ISO 8686-5-1994 Cranes Design principles for loads and load combinations Part 5 Overhead travelling and portal bridge cranes《起重机 装载及装载组合设计原则 第5部分：桥式起重机和门桥式起重机》.pdf

CSN ISO 8688-1-1993 Tool life testing in milling Part 1 Face milling《铣削刀具使用寿命测试 第1部分：面铣刀》.pdf

CSN ISO 8688-2-1993 Metal-cutting tools Tool life testing in milling Part 2 End milling《金属切割刀具 铣削刀具使用寿命测试 第2部分：端铣刀》.pdf

CSN ISO 8769-1994 Reference sources for the calibration of surface contamination monitors Beta-emiters (maximum energy greater than 0 15 MeV) and alpha-emitters《地面污染监测器校准用参考源β 发射器(.pdf

CSN ISO 8791-1-1993 Paper and board - Determination of roughness smoothness (air leak methods) - Part 1 General method《纸和纸板 粗糙度 平滑度测定（气漏方法） 第1部分：一般方法》.pdf

CSN ISO 8791-2-1994 Paper and board - Determination of roughness smoothness (air leak methods) - Part 2 Bendtsen method《纸和纸板 粗糙度 平滑度测定（气漏方法） 第2部分：本特森（Bendtsen）方法》.pdf

CSN ISO 8792-1993 Wire rope slings Safety criteria and inspection procedures for use《钢丝绳吊索 使用的安全标准和检查程序》.pdf

CSN ISO 8813-1994 Earth-moving machinery Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom《土方机械 配备侧起重臂的铺管机和轮式拖拉机或装载机的提升能力》.pdf

CSN ISO 8854-1992 Road vehicles Alternators with regulators Test methods and general requirements《道路车辆 带调节器的交流发电机 试验方法及一般要求》.pdf