CLSI VET01-S2-2013 Performance Standards for Antimicrobial Disk and Dilution Susceptibility Tests for Bacteria Isolated From Animals Second Informational Supplement.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1373-2003 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions《模拟冬季条件下测定顶楼绝缘系统热阻性的标准规程》.pdf

ASTM C1374-2003 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation《测定松散充填建筑物绝缘的安装厚度的标准试验方法》.pdf

ASTM C1374-2003(2009) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation《测定松散充填建筑物绝缘的安装厚度的标准试验方法》.pdf

ASTM C1374-2014 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation《测定气动松散充填建筑隔热层安装厚度的标准试验方法》.pdf

ASTM C1374-2018 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation.pdf

ASTM C1375-2000(2005) Standard Guide for Substrates Used in Testing Building Seals and Sealants《用于测试建筑物密封和胶粘剂的基质的标准指南》.pdf

ASTM C1375-2000(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants《用于测试建筑物密封和胶粘剂的基质的标准指南》.pdf

ASTM C1375-2000(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants《用于测试建筑物密封和胶粘剂基质的标准指南》.pdf

ASTM C1376-2003 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass《玻璃上的热解和真空淀积涂层的标准规范》.pdf