CNS 10238-1983 High Temperature Insulated Electrical Wire (General Rules)《高温绝缘电线总则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F19-2011 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals《镀金属陶瓷密封件抗拉及真空标准试验方法》.pdf

ASTM F19-2011(2016) Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals《金属陶瓷密封件的张力和真空试验的标准试验方法》.pdf

ASTM F204-1976(2002) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire《密封钨丝和钨条表面裂纹的试验方法》.pdf

ASTM F204-1976(2009) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire《密封钨丝和钨条表面裂纹的标准试验方法》.pdf

ASTM F204-1976(2013) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire《钨丝密封条和丝表面缺陷的标准试验方法》.pdf

ASTM F204-1976(2018) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire《钨密封杆和线材表面缺陷的标准试验方法》.pdf

ASTM F205-1994(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing《用称量法测定细金属丝直径的测试方法》.pdf

ASTM F205-1994(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing《用称量法测定细金属丝直径的标准试验方法》.pdf

ASTM F205-1994(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing《用称重法测量细丝直径的标准试验方法》.pdf