CNS 10276-1983 Chemical Reagent (p-Nitrophenylhydrazine)《化学试药（对硝苯肼）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN ISO 2148-1994 Continuous handling equipment Nomenclature《持续性搬运设备 术语》.pdf

CSN ISO 2173-1994 Fruit and vegetable products Determination of soluble solids - Refractometric method《水果及蔬菜制品 可溶性固形物含量的测定 折射法》.pdf

CSN ISO 2178-1994 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method《磁性衬底的无磁性涂层 涂层厚度测量 磁性法》.pdf

CSN ISO 2187-1992 Textile machinery and accessories - Spinning preparatory spinning and doubling (twisting) machinery - List of equivalent terms《纺织品机械与附件 前纺机械，纺织及并捻联合机 等效术语表》.pdf

CSN ISO 2203-1994 Technical drawings Conventional representation of gears《技术制图 齿轮的传统表示法》.pdf

CSN ISO 2236-1994 Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions《螺钉及螺母装配工具 锻造管状套筒扳手 头部外形最大尺寸》.pdf

CSN ISO 228-2-1993 Pipe threads where pressure-tight joints are not made on the threads - Part 2 Vertification by means of limit gauges《非螺纹密封的管螺纹 第2部分：限制量规确认》.pdf

CSN ISO 2297-1992 Chemical analysis of aluminium and its alloys Complexometric determination of magnesium《铝及铝合金化学分析 络合滴定法测定镁的含量》.pdf

CSN ISO 2361-1994 Electrodeposited nickel coatings on magnetic and non-magnetic substrates Measurement of coating thickness Magnetic method《磁性和非磁性基体上的镍电镀涂层 涂层厚度测量 磁性法》.pdf