CNS 10683-1983 Round Steel Chains Without Quality Requirements《圆钢制环链（不涉及品质要求）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 2089-2005 Aluminium alloy AL-P2014A T6 or T62 - Sheet and strip - 0 4 mm a 6 mm《AL-P2014A T6或T62铝合金 0 4mm-6mm的薄板及带材》.pdf

BS EN 209-2000 Steel drums Removable head (open head) drums with a minimum total capacity of 210 l《钢桶 最小总容积为210 l的可拆卸盖(开口式)钢桶》.pdf

BS EN 2090-2005 Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0 3 mm a 6 mm《铝合金AL-P2024-T3 覆层薄板和带材 0 3 mm≤a≤6 mm》.pdf

BS EN 2092-2005 Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0 4 mm a 6 mm《航空航天系列 AL-P7075 T6或T62型铝合金 覆层铝合金板材及带材 0 4mm≤a≤6mm》.pdf

BS EN 2093-1992 Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm a 150 mm《AL-P 7009-T74铝合金 20mm≤a≤150mm手工锻件》.pdf

BS EN 2094-1992 Aluminium alloy AL-P7009-T74 - Die forgings 3 mm a 150 mm《AL-P 7009-T74铝合金 3mm≤a≤150mm模锻件》.pdf

BS EN 210-2000 Steel drums Non-removable head (tight head) drums with a minimum total capacity of 216 5 l《钢桶 最小总容积为216 5 l的不可拆卸盖(密封式)钢桶》.pdf

BS EN 2100-1992 Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D 200 mm《AL-P2014A-T4511铝合金 a或D≤200mm的挤压棒材和型材》.pdf

BS EN 2101-1991 Specification for chromic acid anodizing of aluminium and wrought aluminium alloys《铝合金和锻铝合金铬酸阳极化规范》.pdf