CNS 10880-33-1997 Method of test for paint components-Quantitative test of copper in paint《涂料成分检验法–涂料中铜之定量试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F945-2006 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials《航空发动机清洗材料对钛合金的应力腐蚀标准试验方法》.pdf

ASTM F945-2012 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials《用飞行器发动机清洗剂对钛合金应力腐蚀的标准试验方法》.pdf

ASTM F946-1985(2004) Standard Guide for Establishing Security Seal Control and Accountability Procedures《制定安全密封控制和衡算计量程序的标准指南》.pdf

ASTM F946-1985(2010) Standard Guide for Establishing Security Seal Control and Accountability Procedures《制定安全密封控制和衡算计量程序的标准指南》.pdf

ASTM F946-1985(2018) Standard Guide for Establishing Security Seal Control and Accountability Procedures《建立安全印章控制和责任程序的标准指南》.pdf

ASTM F948-1994(2006) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow《在恒定内流动压力下塑料管道系统和组件损坏时间的标准试验方法》.pdf

ASTM F949-2006a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings《光滑内壁聚氯乙烯（PVC）波纹和配件的标准规范》.pdf

ASTM F949-2009 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings.pdf

ASTM F949-2010 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings《内部光滑的聚(氯乙烯)(PVC)波纹污水管及配件标准规范》.pdf