CNS 10881-1984 Buttermilk Dried (for Animal Feed Purpose)《酪乳粉（饲料用）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3274-2009(2013) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth or Soil and Dirt Accumulation《用真菌(真菌类的或藻类的)生长或污物和.pdf

ASTM D3274-2009(2017) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth or Soil and Dirt Accumulation《通过真菌或藻类生长或土壤和污垢堆积来评.pdf

ASTM D3274-2009e1 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth or Soil and Dirt Accumulation《用真菌(真菌类的或藻类的)生长或污物和污垢堆积.pdf

ASTM D3275-2006 Standard Classification System for E-CTFE-Fluoroplastic Molding Extrusion and Coating Materials《E-CTFE-氟塑料模压、挤压和涂覆材料的标准分类系统》.pdf

ASTM D3275-2008 Standard Classification System for E-CTFE-Fluoroplastic Molding Extrusion and Coating Materials《E-CTFE-氟塑料模压、挤压和涂覆材料的标准分类系统》.pdf

ASTM D3275-2008(2013) Standard Classification System for E-CTFE-Fluoroplastic Molding Extrusion and Coating Materials《E-CTFE-氟塑料模压、挤压和涂覆材料的标准分类系统》.pdf

ASTM D3276-2007 Standard Guide for Painting Inspectors (Metal Substrates)《涂料(金属衬底)检验人员的标准指南》.pdf

ASTM D3276-2015 Standard Guide for Painting Inspectors (Metal Substrates)《涂漆检查员用标准指南 (金属基质)》.pdf

ASTM D3276-2015e1 Standard Guide for Painting Inspectors (Metal Substrates)《涂漆检验员(金属基板)的标准指南》.pdf