CNS 11183-1985 Method of Test for High Frequency Inductors and Intermediate Frequency Transformers for Electronic Equipment《电子装置用高频线圈及中频变压器检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 7241-1995 k423a合金锭.pdf

HB 7243-1995 加工钛合金MJ螺纹用莫氏圆锥柄螺纹铣刀.d=10.0～20.0mm P=0.75～2.50mm.pdf

HB 7244-1995 加工钛合金MJ螺绞用莫氏圆锥柄螺纹铣刀.d=25.0～32.0mm P=1.00～2.50mm.pdf

HB 7245-1995 加工钛合金MJ螺绞用套装式螺纹铣刀.d=40～100mm P=1.00～3.00mm.pdf

HB 7246-1995 加工钛合金MJ螺纹用套装式螺纹铣刀.d=40～100mm P=1.00～3.00mm.pdf

HB 7247-1995 加工钛合金MJ螺纹用螺纹铣刀技术条件.pdf

HB 7256-1995 飞机自冷与风冷电气设备环境温度和高度范围.pdf

HB 7257-1995 轻型燃气轮机进气过滤器.pdf

HB 7262.1-1995 航空产品电装工艺.电子元器件的安装.pdf