CNS 11312-1985 Oil Base Marking Pens《油性标记笔》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5483-2005(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry《用压差扫描热量测定法测试润滑脂的氧化反应时间的标准试验方法》.pdf

ASTM D5483-2005(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry《用压差扫描热量测定法测试润滑脂的氧化反应时间的标准试验方法》.pdf

ASTM D5485-2005 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter《用锥形腐蚀计测定燃烧制品腐蚀效应的标准试验方法》.pdf

ASTM D5485-2009 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter.pdf

ASTM D5485-2010 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter《用锥形腐蚀计测定燃烧产物的腐蚀作用的标准试验方法》.pdf

ASTM D5485-2011 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter《用锥形腐蚀计测定燃烧制品的腐蚀效应的标准试验方法》.pdf

ASTM D5485-2016 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter《用锥形腐蚀计测定燃烧制品腐蚀效应的标准试验方法》.pdf

ASTM D5486 D5486M-2006 Standard Specification for Pressure-Sensitive Tape for Packaging Box Closure and Sealing《包装 箱盒封闭和密封用压敏胶带标准规范》.pdf

ASTM D5486 D5486M-2006(2012) Standard Specification for Pressure-Sensitive Tape for Packaging Box Closure and Sealing 《包装、箱盒封闭和密封用压敏胶带标准规格》.pdf