CNS 11425-1985 Method of Test for Cone Penetration of Refractory Mortar《耐火墁料针入度试验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CEN TR 16710-1-2015 Ergonomics methods - Part 1 Feedback method - A method to understand how end users perform their work with machines.pdf

CEN TR 16721-2014 Bio-based products - Overview of methods to determine the bio-based content《生物基质产品 生物基质含量的测定方法概述》.pdf

CEN TR 16741-2015 Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing interior textile.pdf

CEN TR 16742-2014 Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe《智能交通系统 智能交通系统中隐私政策的标准和在欧洲的系统》.pdf

CEN TR 16748-2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure low pressure and gravity die casting《铝和铝合金 高压 低压和重力压铸铝硅合金产品的机械性能》.pdf

CEN TR 16749-2014 Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure Low Pressure and Gravity Die Cast Products《铝及铝合金 高压 低压和重力压铸产品缺陷和不完善的.pdf

CEN TR 16787-2014 Industrial Gas Installation - Guideline《工业气体装置 导则》.pdf

CEN TR 16788-2014 Characterization of sludges - Guideline of good practice for thermal processes《污泥特性 热工过程的良好实践指南》.pdf

CEN TR 16791-2017 Quantifying irradiance for eye-mediated non-imageforming effects of light in humans.pdf