CNS 11942-5-1999 Methods for determination of manganese in copper and copper alloys《铜及铜合金中锰定量法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F645-2018 Standard Guide for Selection Design and Installation of Thermoplastic Water- Pressure Piping Systems.pdf

ASTM F645-2018a Standard Guide for Selection Design and Installation of Thermoplastic Water- Pressure Piping Systems《热塑性水压管道系统的选择设计和安装的标准指南》.pdf

ASTM F647-1994(2006) Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application《神经外科用可植入分路组件的评定和确定标准实施规程》.pdf

ASTM F647-1994(2014) Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application《神经外科用可植入分路组件的评定和确定的标准实施规程》.pdf

ASTM F648-2007e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants《外科植入物用超高分子量聚乙烯粉末和制造形态的标准规范》.pdf

ASTM F648-2010 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants.pdf

ASTM F648-2010a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants《外科植入用超高分子量聚乙烯粉末及成形件的标准规范》.pdf

ASTM F648-2013 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants《外科植入物用超高分子量聚乙烯粉末及组成形式的标准规范》.pdf

ASTM F648-2014 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants《外科植入用超高分子量聚乙烯粉末及成形件的标准规范》.pdf