CNS 12194-1987 Method of Test for Oxidation Characteristics of Crankcase Lubricating Oils-L38 Test《评估车用机油高温氧化特性试验法–L38试验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 3049-1998 O-rings in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD《碳氟橡胶制低压缩永久变形O形环 硬度 80IRHD》.pdf

BS EN 305-1997 Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers《热交换器 热交换器的性能定义和确定所.pdf

BS EN 3050-1998 O-rings in fluorocarbon rubber (FKM) low compression set - Technical specification《碳氟橡胶制低压缩永久变形O形环 技术规范》.pdf

BS EN 3052-2009 Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in heat and corrosion resisting steel passivated - Classification 1100 MPa .pdf

BS EN 3053-1994 Bearings airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads《机体轴承 钢制的单列自调心滚子轴承 尺寸和负载》.pdf

BS EN 3054-1994 Bearings airframe rolling - Single row self-aligning roller bearings in steel cadmium plated - Dimensions and loads《机体轴承 镀铬的钢制的单列自调心滚子轴承 尺寸和负载》.pdf

BS EN 3055-1994 Bearings airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads《机体轴承 耐蚀钢的单列自调心滚子轴承 尺寸和负荷》.pdf

BS EN 3056-1994 Bearings airframe rolling - Rigid double row ball bearings in steel - Dimensions and loads《机体轴承 钢制的刚性双列球轴承 尺寸和负荷》.pdf

BS EN 3057-1994 Bearings airframe rolling - Rigid double row ball bearings in steel cadmium plated - Dimensions and loads《机体轴承 镀铬的钢制的刚性双列球轴承 尺寸和负载》.pdf