CNS 12696-1990 Lever Tumbler Mortise Locks《嵌入式门锁》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 554-1993 Elbow - Universal 45 Degrees (Rev 3).pdf

AIA NAS 555-1993 Tee - Universal (Rev 3).pdf

AIA NAS 556-1962 (Inactive)Spot and Seam Welding of Commercially Pure Titanium Specification for Superseded - November 1962 (Use MIL-V-6858) (Rev 1).pdf

AIA NAS 557-1997 Grommet Plastic-Split Revision 6 FSC 5325.pdf

AIA NAS 558-1994 Keys - Square and Rectangular (Rev 5).pdf

AIA NAS 559-2003 Lock-Rod End (Key Type) Rev 5 FSC 5340.pdf

AIA NAS 56-1949 (Inactive)Close Tolerance Alloy Steel and Alum Alloy 3 8-24 (Superseded by AN173 - 186) (Rev 4).pdf

AIA NAS 560-1980 (Inactive)Screw-Machine Non Magnetic High Temperature Structural 100 Degree Flush Head (Rev 5).pdf

AIA NAS 5600-1994 (Inactive)Screw 100 Degree Head Tri-Slot Recess Alloy Steel Full Thread Self-Locking and Nonlocking (Rev 6).pdf