CNS 12865-1-1991 Method of Test for Digital Microelectronics ( High Level Output Voltage )《数字微电子检验法(高位准输出电压)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A348 A348M-2005 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method 100 to 10 000 Hz and 25-cm Epstein F.pdf

ASTM A348 A348M-2005(2011) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method 100 to 10 000 Hz and 25-cm Eps.pdf

ASTM A348 A348M-2005(2015) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method 100 to 10&x2009 000 Hz and 25-.pdf

ASTM A350 A350M-2004a Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components.pdf

ASTM A350 A350M-2007 Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components《管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范》.pdf

ASTM A350 A350M-2010 Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components《管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规格》.pdf

ASTM A350 A350M-2011 Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components《碳钢和低合金钢锻件及需进行缺口韧性试验的管道组件的标准规格》.pdf

ASTM A350 A350M-2012 Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components《碳钢和低合金钢锻件及需进行缺口韧性试验的管道组件的标准规格》.pdf

ASTM A350 A350M-2013 Standard Specification for Carbon and Low-Alloy Steel Forgings Requiring Notch Toughness Testing for Piping Components《碳钢和低合金钢锻件及需进行缺口韧性试验的管道组件的标准规格》.pdf