CNS 13410-1994 Method of Test for Pesticide Residues in Foods - Test of Fenamiphos an Organophosphorous Pesticide《食品中残留农药检验方法–有机磷剂芬灭松之检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7394-2013 0625 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers《采用立体台式旋转粘度计测定建筑涂层流变学特性的标准实施规程》.pdf

ASTM D7394-2017 red 3414 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers《使用三台旋转台粘度计测定建筑涂料流变特性的标准实施规程》.pdf

ASTM D7394-2018 red 1250 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers.pdf

ASTM D7395-2007 374 Standard Test Method for Cone Plate Viscosity at a 500 s-1 Shear Rate《500s剪切速率下测定锥体 平板粘度的标准试验方法》.pdf

ASTM D7395-2007(2012) 5625 Standard Test Method for Cone Plate Viscosity at a 500 s-1 Shear Rate《在500 s-1 剪切率下的锥 板粘度的标准试验方法》.pdf

ASTM D7395-2018 red 1875 Standard Test Method for Cone Plate Viscosity at a 500 s-1 Shear Rate.pdf

ASTM D7396-2008 431 Standard Guide for Preparation of New Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting《制备新和连续的镀锌(电镀)钢材表面用于喷漆的标准指南》.pdf

ASTM D7396-2014 9051 Standard Guide for Preparation of New Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting《制备新和连续的镀锌 (电镀) 钢材表面用于喷漆的标准指南》.pdf

ASTM D7397-2008 459 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method).pdf