CNS 13489-1995 Frame Alignment and Cyclic Redundancy Check Procedures Relating to Basic Frame Structures《阶层式第一位阶之码框校准与循环冗余核对程序》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 42 0349-1988 Metal testing Determination of the nil-ductility transition temperature of structural steels《结构钢的无延性转变温度的测定》.pdf

CSN 42 0350-1987 Metal testing Determination of brittleness temperature of structural steels by impact bending test《通过碰撞粘接试验测定结构钢的脆化温度》.pdf

CSN 42 0361-1983 Metal testing Grey cast iron Determination of bending strength《灰口铸铁 抗弯强度的测定》.pdf

CSN 42 0362-1986 Metal testing Fatigue testing of metals Terms definitions and symbols《金属疲劳试验 术语，定义和符号》.pdf

CSN 42 0363-1986 Metal testing Fatigue testing of metals Methodology of testing《金属的疲劳试验方法》.pdf

CSN 42 0368-1973 Metal testing Fatigue testing of metals Statistical evaluation of fatigue test results of metals《金属的疲劳测试 金属疲劳试验结果的统计评估》.pdf

CSN 42 0382-1978 Metal testing Charpy impact test at low temperature (U-notch and V-notch)《低温夏比冲击试验（ U型缺口和V型缺口）》.pdf

CSN 42 0383-1980 Metal testing Charpy impact test at elevated temperatures《高温下的夏比冲击试验》.pdf

CSN 42 0426-1983 Metal testing Upsetting test《金属的测试 镦粗试验》.pdf