CNS 14294-1998 Method for determination of resistance to sulfuric acid of dense shaped refractory products《致密定型耐火制品抗硫酸性测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F1945-2005 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting《测定暴露于室内荧光照明下的喷墨打印品的耐光性的标准规程》.pdf

ASTM F1945-2005(2011) Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting《测定曝露于室内荧光照明和室外透进日光下的喷墨打印制品耐晒性的标准操作规程》.pdf

ASTM F1946-2004 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight《测定曝露于室内荧光照明和室外透进日光下的喷墨打印制品.pdf

ASTM F1947-2004 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits《折叠聚氯乙烯(PVC)管进入现有排水管和管道中的安装标准实施规程》.pdf

ASTM F1947-2010 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits《在现存的污水管道和输水管道重安装折叠式聚乙烯管的标准操作规程》.pdf

ASTM F1948-2005 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing《外径受控的热塑性气体配送管用金属机械配件的标.pdf

ASTM F1948-2005(2011) Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing《用于外径控制热塑供气管道和支管的.pdf

ASTM F1948-2012 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing《外径受控的热塑性气体配送管和管道用金属机械配.pdf

ASTM F1948-2015 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing《外径受控的热塑性气体分配管和管道用金属机械配.pdf