CNS 14386-11-2000 Life cycle test procedure for batteries of electric motorcycles《电动机器脚踏车-电池寿命试验法》.pdf

相关资源

CNS 3105-2001 Method of test for fuel consumption for motorcycles《机器脚踏车燃料消耗量试验法》.pdf

CNS 3106-1988 Method of Brake Test for Motorcycles《机器脚踏车煞车试验法》.pdf

CNS 3107-1988 Method of Acceleration Test for Motor Cycles《机器脚踏车加速试验法》.pdf

CNS 3108-1988 Method of Coasting Test for Motor Cycles《机器脚踏车滑行试验法》.pdf

CNS 14386-10-2000 Limits and methods of measurement for electromagnetic interference of electric motorcycles《电动机器脚踏车电磁干扰限制值与量测方法》.pdf

CNS 14386-12-2000 Capacity test procedure for batteries of electric motorcycles《电动机器脚踏车-电池容量试验法》.pdf

CNS 14386-13-2000 Energy and power density test procedure for batteries of electric motorcycles《电动机器脚踏车-电池能量及功率密度试验法》.pdf

CNS 14386-3-2000 Method of maximum speed test for electric motorcycles《电动机器脚踏车-最高速率试验法》.pdf

CNS 14386-4-2000 Method of acceleration test for electric motorcycles《电动机器脚踏车-加速性能试验法》.pdf

猜你喜欢

BS EN ISO 140-18-2006 Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of sound generated by rainfall on building elements.pdf

BS EN ISO 1401-2016 Rubber hoses for agricultural spraying《农业喷雾机用橡胶软管》.pdf

BS EN ISO 1402-2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing《橡胶和塑料软管及软管组件 液压静力试验》.pdf

BS EN ISO 1403-2008 Rubber hoses textile-reinforced for general-purpose water napplications - Specification《一般用途的输水用织物增强橡胶软管 规范》.pdf

BS EN ISO 1421-2016 Rubber- or plastics-coated fabrics Determination of tensile strength and elongation at break《橡胶或塑料涂层织物 拉伸强度和断裂伸长率的测定》.pdf

BS EN ISO 1452-1-2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC U) - G.pdf

BS EN ISO 1452-2-2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC U) - P.pdf

BS EN ISO 1452-3-2010 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Fitti.pdf

BS EN ISO 1452-4-2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC U) - V.pdf