CNS 1536-1961 Aluminum Oxide (for Chromatography)《化学试药 氧化铝(色层分析用)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6258-2017 red 9375 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels《测定柴油燃料中溶剂红164染料浓度的标准试验方法》.pdf

ASTM D6259-1998(2004) Standard Practice for Determination of a Pooled Limit of Quantitation《定量的汇合限制测定的标准操作规程》.pdf

ASTM D6259-1998(2010) 8125 Standard Practice for Determination of a Pooled Limit of Quantitation《定量的沉积限值测定的标准实施规程》.pdf

ASTM D6259-2015 4498 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method《测定试验方法用定量汇合限制的标准实施规程》.pdf

ASTM D6261-1998(2003) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)《由热塑聚酯(TPES)制造的挤压和压缩铸模基础型材的标准规范》.pdf

ASTM D6261-2010 5625 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)《由热塑性聚酯(TPES)制成的挤塑和模压成型基本型材标准规范》.pdf

ASTM D6261-2013 red 6875 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)《采用热塑性聚酯(TPES)制成的挤制和模压成型基本型材的标准规范》.pdf

ASTM D6261-2014 4114 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester &40 TPES&41 《热塑聚酯 (TPES) 制挤压和压缩模塑基本型材的标准规范》.pdf

ASTM D6262-2012 9375 Standard Specification for Extruded Compression Molded and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)《聚芳基乙醚酮(PAEK)挤压 压缩模塑和注模型材的标准规格》.pdf