CNS 1596-1962 Benzoyl Chloride《化学试药（氯化苯甲醯）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 22 2920-1986 Metal cutting circular saws for high temperature cutting Basic dimensions《高温切削金属圆形锯 基本尺寸》.pdf

CSN 22 2949-1961 Circular saw blades with segments《带刀齿圆形锯条》.pdf

CSN 22 2950-1966 Metal cutting saw blades Single-sided hand-operated metal cutting saw blades《单边手动金属锯条》.pdf

CSN 22 2951-1966 Metal cutting saw blades Two-sided hand-operated metal cutting saw blades《双边手动金属锯条》.pdf

CSN 22 2952-1966 Metal cutting saw blades Single-sided hand-operated metal cutting saw blades with conjugate serrations《带锯齿流变的单边手动金属锯条》.pdf

CSN 22 2970-1984 Metal cutting saw bands Basic dimensions《金属锯带基本尺寸》.pdf

CSN 22 3000-1988 Screw taps Survey《旋拧丝锥 调查》.pdf

CSN 22 3001-1978 Screw taps Technical rules《螺丝攻 术规范》.pdf

CSN 22 3006-1993 Taps ungrounded tolerance - field 2N a 3N Dimensions and tolerances of the threaded portion《不接地丝锥，承受度2N 到3N螺纹部分尺寸与承受度》.pdf