CNS 3136-1981 Square Head Bolts (Regular)《方头螺栓（一般用）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 6122.1-2002 圆角铣刀 第1部分;型式和尺寸.pdf

GB T 6122.2-2002 圆角铣刀 第2部分;技术条件.pdf

GB T 6124-2007 T型槽铣刀 型式和尺寸.pdf

GB T 6125-2007 T型槽铣刀 技术条件.pdf

GB T 6128.1-2007 角度铣刀 第1部分 单角和不对称双角铣刀.pdf

GB T 6128.2-2007 角度铣刀 第2部分 对称双角铣刀.pdf

GB T 6129-2007 角度铣刀 技术条件.pdf

GB T 6130-2001 镶片圆锯.pdf

GB T 6131.1-2006 铣刀直柄.第1部分;普通直柄的型式和尺寸.pdf