CNS 3415-1987 Safety Code for Power Rolling Machines (General Rule)《动力压机安全规章（总则）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2457-2005(2009) Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft《提供重量转移控制飞行器所要求的产品信息的标准规范》.pdf

ASTM F2457-2005(2018) Standard Specification for Required Product Information to be Provided withWeight-Shift-Control Aircraft《使用重量转移控制飞机提供的所需产品信息的标准规范》.pdf

ASTM F2458-2005 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants《组织胶粘剂和封闭剂的伤口闭合强度的标准试验方法》.pdf

ASTM F2458-2005(2010) Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants《组织胶粘剂和封闭剂的伤口闭合强度的标准试验方法》.pdf

ASTM F2458-2005(2015) Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants《组织胶粘剂和密封剂的伤口闭合强度的标准试验方法》.pdf

ASTM F2459-2005 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis《从金属医疗部件提取残余物并经由化学分离测重法确定数量的标准试验方法》.pdf

ASTM F2459-2012 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis《医疗部件提取残余物并经由化学分离测重法确定数量的标准试验方法》.pdf

ASTM F2459-2018 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis《从金属医疗部件中提取残留物并通过重量分析定量的标准试验方法》.pdf

ASTM F2460-2006 Standard Practice for Special Requirements for Bumper Boats《碰碰船特殊要求的标准规程》.pdf