CNS 3954-1976 Nylon Sewing Thread《耐隆缝线》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 13765-5-2006 Refractory mortars - Determination of grain size distribution (sieve analysis)《耐熔灰浆 测定颗粒尺寸分布(筛分)》.pdf

BS ISO 13765-6-2006 Refractory mortars - Determination of the moisture content of ready-mixed mortars《耐熔灰浆 测定预拌灰浆的湿气含量》.pdf

BS ISO 13767-2012 Ships and marine technology Ship-s mooring and towing fittings Shipside roller fairleads《船舶和海洋技术 船舶停泊和拖航设备 码头滚轮导缆器》.pdf

BS ISO 13774-1999 Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability《输送内燃机燃料用橡胶和塑料软管 易燃性试验方法》.pdf

BS ISO 13775-1-2015 Thermoplastic tubing and hoses for automotive use Non-fuel applications《汽车用热塑管和软管 非燃料应用》.pdf

BS ISO 13775-2-2016 Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications《汽车用热塑管和软管 石油类燃料用》.pdf

BS ISO 13776-2012 Ships and marine technology Ship-s mooring and towing fittings Pedestal fairleads《船舶和海洋技术 船舶停泊和拖航设备 基架导缆器》.pdf

BS ISO 13778-2017 Plain bearings Quality assurance of thin-walled half bearings Selective assembly of bearings to achieve a narrow clearance range《滑动轴承 薄壁轴瓦的质量保证 选配法获得小间隙》.pdf

BS ISO 13779-4-2002 Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength《外科植入物 羟磷灰石 涂层粘结强度的测定》.pdf