CNS 4372-1978 Round Thread with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)《圆螺纹(具有间隙,深螺腹,螺距7mm之螺纹限界尺.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F24-2009 Standard Method for Measuring and Counting Particulate Contamination on Surfaces《表面颗粒状污染物的计数和测量标准方法》.pdf

ASTM F24-2009(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces《表面粒状杂质的测量和计数的标准试验方法》.pdf

ASTM F25 F25M-2009 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《电子及类似用途用的清洁室及其它防尘区域空气中粒状杂质的筛分和计算的标准.pdf

ASTM F25 F25M-2009(2015) Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《洁净室和其他粉尘控制地区中气载颗粒污染的大小和计数的标准试.pdf

ASTM F25-2004 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas《洁净室及其它防尘区域空气中粒状杂质的测量和计数的标准试验方法》.pdf

ASTM F256-2005(2010) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《含有18%或26%铬的铬铁密封合金的标准规范》.pdf

ASTM F256-2005(2015) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《铬含量为18%或者28%的铬-铁密封合金的标准规格》.pdf

ASTM F256-2005e1 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium《含有18%或26%铬的铬铁焊接用合金的标准规范》.pdf

ASTM F269-1960(2002) Standard Test Method for Sag of Tungsten Wire《钨丝弯曲度的试验方法》.pdf