CNS 4516-1986 Jacks Telephone (Type JJ-088)《电话插口（JJ–088型）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6099-2013 red 7500 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates《聚氨酯原材料的标准试验方法 中等至高等酸度芳香族异氰酸酯酸.pdf

ASTM D6099-2018 red 0000 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates.pdf

ASTM D6100-2005 Standard Specification for Extruded Compression Molded and Injection Molded Acetal Shapes (POM)《挤制、压铸和注模乙缩醛型材(POM)的标准规范》.pdf

ASTM D6100-2011 3295 Standard Specification for Extruded Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)《采用挤压 压缩和注射成形的聚甲醛物体(POM)的标准规范》.pdf

ASTM D6100-2014 4674 Standard Specification for Extruded Compression Molded and Injection Molded Polyoxymethylene Shapes &40 POM&41 《挤制 模压成型以及注塑成型的聚甲醛型材40 POM41的标准规范》.pdf

ASTM D6100-2017 7500 Standard Specification for Extruded Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)《挤出压缩模塑和注射模塑聚甲醛形状(POM)的标准规范》.pdf

ASTM D6102-2006 Standard Guide for Installation of Geosynthetic Clay Liners《土工合成粘土衬垫安装的标准指南》.pdf

ASTM D6102-2012 red 8750 Standard Guide for Installation of Geosynthetic Clay Liners《土工合成粘土衬垫安装的标准指南》.pdf

ASTM D6102-2015 4571 Standard Guide for Installation of Geosynthetic Clay Liners《土工合成粘土衬垫的安装的标准指南》.pdf