CNS 5007-1979 Rotating Tools with Parallel Shanks-Diameters of Shanks and Sizes Driving Squares《直柄旋转刀具之柄径及驱动方头之尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 3462-1994 Aerospace Series Titanium Alloy TI-P19001 Annealed Bar for Machining D Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 D≤150mm的切削加工用钛合金TI-P19001退火棒材 第P2版》.pdf

ASD-STAN PREN 3463-1994 Aerospace Series Titanium Alloy TI-P19001 Solution Heat Treated and Aged Bar for Machining D Less Than or Equal to 75 mm (Edition P 2)《航空航天系列 D≤75mm的切削加工用钛合.pdf

ASD-STAN PREN 3465-1995 Aerospace Series Titanium Alloy TI-P63001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm .pdf

ASD-STAN PREN 3466-1988 Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Bar for Machining De Less Than or Equal to 150 mm《切削加工用钛合金TI-P68制De≤150.pdf

ASD-STAN PREN 3466-1994 Aerospace Series Titanium Alloy TI-P63001 Solution Treated and Aged Bar for Machining D Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 D≤150mm的切削加工用钛合金TI.pdf

ASD-STAN PREN 3467-1996 Aerospace Series Titanium Alloy TI-C64001 not Heat Treated Remelting Stock De Less Than or Equal to 300 mm (Edition P 2)《航空航天系列 De≤300mm的钛合金TI-C64001制非热处理的再.pdf

ASD-STAN PREN 3468-1988 Aerospace Series Steel FE-PA13 Softened 500 Less Than or Equal to Rm Less Than or Equal to 700 MPa Forgings De Less Than or Equal to 100 mm (Issue P 1)《航空航天.pdf

ASD-STAN PREN 3469-2000 Aerospace Series Steel FE-PM1802 (X5CrNiCu15-5) Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less than or Equal .pdf

ASD-STAN PREN 3470-1998 Aerospace Series Steel FE-PM1503 (X3CrNiMoAI13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated For.pdf