CNS 5202-2000 General rules of color identification for protective conductor and neutral conductor and terminal marking for apparatus《地线及中性线色别及端子符号通则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 4302-2008 Aerospace series - Open ring insert tool square drive《航空航天系列 方形驱动开环插入工具》.pdf

BS EN 4303-2005 Sleeves tubular for tension screws with flush head in corrosion resisting steel passivated (0 25 mm wall thickness)《航空航天系列 带钝化(壁厚为0 25mm)耐腐蚀钢制埋头拉伸螺钉用管形套管》.pdf

BS EN 4304-2005 Sleeves tubular for shear screws with flush head in corrosion resisting steel passivated (0 25 mm wall thickness)《钝化耐腐蚀钢制埋头剪切螺钉用套管(0 25毫米壁厚)》.pdf

BS EN 4306-2005 Sleeves tubular for tension screws with flush head in corrosion resisting steel passivated (0 50 mm wall thickness)《钝化耐腐蚀钢制埋头张力螺钉用套管(0 50毫米壁厚)》.pdf

BS EN 4307-2005 Sleeves tubular for shear screws with flush head in corrosion resisting steel passivated (0 50 mm wall thickness)《钝化耐腐蚀钢制埋头剪切螺钉用套管(0 50毫米壁厚)》.pdf

BS EN 4311-2006 Aerospace series - Studs coarse tolerance reduced shank medium length threads in heat and corrosion resisting steel MoS2 lubricated - Classification 1100 MPa (at am.pdf

BS EN 4312-2006 Aerospace series - Studs coarse tolerance reduced shank medium length thread in heat and corrosion resisting steel with aluminium pigmented coating - Classification.pdf

BS EN 4313-2005 Aerospace series - Aluminium aloy AL-P6013-T6 - Sheet and strip - 0 5 mm a 6 mm《航空航天系列 AL-P6013-T6型铝合金 薄板材和带材 0 5mm≤a≤6mm》.pdf

BS EN 4314-2007 Aerospace series - nHeat resisting alloy nFE-PA2602 n(X4NiCrTiMoV26-15) - nNon heat treated nforging stock a nor D ≤ 250 mm《航空航天系列 FE-PA2602(X4NiCrTiMoV26-15)型耐热合金 .pdf