CNS 5661-1980 Machine Tools Machine Tapers Morse Tapers and Metric Tapers Taper Sockets Dimensions《工具圆锥套筒》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7214-2007 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation《利用峰面积积分用FT-IR测定已使用润滑剂中氧化物的标准试验方法》.pdf

ASTM D7214-2007a 752 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation《利用峰面积积分用FT-IR测定已使用润滑剂中氧化物的标准试验方法》.pdf

ASTM D7214-2007a(2012) 4375 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation《使用峰面积积分用FT-IR测定已使用润滑剂中氧化物的标准试验方.pdf

ASTM D7215-2008 894 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels《从馏出燃料的模拟馏出分析中测定闪点的标准试验方法》.pdf

ASTM D7215-2008(2013) 0625 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels《通过馏出燃料的模拟馏出分析计算闪点的标准试验方法》.pdf

ASTM D7215-2016 9450 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels《通过馏出燃料的模拟馏出分析计算闪点的标准试验方法》.pdf

ASTM D7216-2005 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers《测定汽车发动机燃油与典型密封人造橡胶兼容性的标准试验方法》.pdf

ASTM D7216-2008 866 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers.pdf

ASTM D7216-2008a 923 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers.pdf