CNS 6149-1988 Method of Test for Electromechanical Switches(Strength of Mounting Means)《电机开关检验法–装架方法之强度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 2909-1976 整体阴模 用于沉头、半沉头螺栓（钉）、铆钉.pdf

HB 2910-1976 整体阴模 用于六角头螺栓（钉）.pdf

HB 2911-1976 组合阴模 用于平锥头、半圆头、扁圆头螺栓（钉）、铆钉.pdf

HB 2912-1976 组合阴模 用于沉头、半沉头螺栓（钉）、铆钉.pdf

HB 2913-1976 组合阴模 用于六角头螺栓（钉）.pdf

HB 2914-1976 硬质合金阴模 用于平锥头、半圆头、扁圆头螺栓（钉）、铆钉.pdf

HB 2915-1976 硬质合金阴模 用于沉头、半沉头螺栓（钉）、铆钉.pdf

HB 2916-1976 硬质合金阴模 用于六角头螺栓（钉）.pdf

HB 2917-1976 缩细阴模 （z23－6机床用）.pdf