CNS 6231-1980 Method of Test for Potassium in Water(Colorimetric Method)《水中钾之检验法（比色法）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 7539-1-2012 Corrosion of metals and alloys Stress corrosion testing General guidance on testing procedures《金属和合金的腐蚀 应力腐蚀试验 第1部分 试验程序的通用指南》.pdf

BS EN ISO 7539-2-1990 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens《金属和合金的腐蚀 应力腐蚀试验 第2部分 弯曲梁试样的制备和使用》.pdf

BS EN ISO 7539-3-1990 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of U-bend specimens《金属和合金的耐腐蚀性 应力腐蚀试验 第3部分 U型弯曲试样的制备和使用》.pdf

BS EN ISO 7539-4-1990 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens《金属和合金的腐蚀 应力腐蚀试验 第4部分 轴向载荷拉伸试样的制备和使用》.pdf

BS EN ISO 7539-5-1990 Corrosion of metals and alloys - Stress corrosion testing - Method for the preparation and use of C-ring specimens《金属和合金的腐蚀 应力腐蚀试验 第5部分 C-环形试样的制备和使用》.pdf

BS EN ISO 7539-6-2011 Corrosion of metals and alloys Stress corrosion testing Preparation and use of precracked specimens for tests under constant load or constant displacement《金属和.pdf

BS EN ISO 7539-7-2005 Corrosion of metals and alloys - Stress corrosion testing - Method for slow strain rate testing《金属与合金的腐蚀 应力腐蚀试验 慢速率应力试验方法》.pdf

BS EN ISO 7539-8-2008 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of specimens to evaluate weldments《金属和合金的腐蚀 应力腐蚀试验 评价焊件的标本制备及使用》.pdf

BS EN ISO 7539-9-2008 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under rising load or rising displacement《金属.pdf