CNS 6265-1980 Method of Test for Soup Ladle for Kitchen《厨房用铲（杓）检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B482-1985(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating《电镀用钨和钨合金的制备的标准实施规程》.pdf

ASTM B482-1985(2013) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating《电镀用钨和钨合金的制备的标准实施规程》.pdf

ASTM B483 B483M-2013 Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications《一般用途铝和铝合金拉制管材标准规格》.pdf

ASTM B483 B483M-2013e1 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications《一般用途的铝和铝合金冷拔管和拉制管的标准规格》.pdf

ASTM B487-1985(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section《用横断面显微观察法测定金属及氧化层厚度的标准试验方法》.pdf

ASTM B487-1985(2013) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section《用横断面显微观察法测定金属及氧化层厚度的标准试验方法》.pdf

ASTM B488-2001(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses《工程用电解沉积镀金层标准规范》.pdf

ASTM B488-2001(2010) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses《工程用电解沉积镀金层标准规格》.pdf

ASTM B488-2001(2010)e1 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses《工程用电解沉积镀金层标准规范》.pdf