CNS 6358-1980 Method of Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge《原油及燃料油中水份与沉淀物之测定法（离心机法）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 7718-1-2016 en_1828 Aircraft Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle Main deck doors《航空器.乘客登机桥或机场摆渡车连接用客舱门接口要求.主舱门》.pdf

BS ISO 7720-2012 en_4145 Prevailing torque type all-metal hexagon nuts style 2 Property class 9《2型常用扭矩全金属六角螺母.性能9级》.pdf

BS ISO 7738-2015 en_6098 Assembly tools for screws and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads《螺钉和螺母用组合工具.组合扳手.扳手长度和头部最大厚度》.pdf

BS ISO 7739-2016 en_4667 Cinematography Two-track photographic analogue sound records on 16 mm motion-picture prints Positions and width dimensions《电影.16mm电影拷贝上两轨道摄影模拟声音记录.位置和宽度尺寸》.pdf

BS ISO 7755-1-2013 en_2061 Hardmetal burrs General specifications《硬金属毛刺 一般规范》.pdf

BS ISO 7755-10-2013 en_7443 Hardmetal burrs Conical round- (ball-) nose burrs (style L)《硬质合金去毛刺锉.锥形圆(球形)头锉(L款)》.pdf

BS ISO 7755-11-2013 en_3736 Hardmetal burrs Conical pointed-nose burrs (style M)《硬质合金去毛刺锉.锥形尖头锉(M型)》.pdf

BS ISO 7755-12-2013 en_3486 Hardmetal burrs Inverted cone burrs (style N)《硬质合金去毛刺锉.倒锥形锉(N款)》.pdf

BS ISO 7755-2-2013 en_5172 Hardmetal burrs Cylindrical burrs (style A)《硬质合金去毛刺锉.圆柱形锉(A款)》.pdf