CNS 7299-1994 Method of Test for Specular Gloss of Paper and Paperboard at 75 Degrees《纸及纸板75角镜面光泽度试验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 5277-1984 Cylindrical Gear for Fine Mechanics (Radial Setting of Tool)《精细机械用圆柱齿轮（齿跨距测量工具之径向调整量数值表）》.pdf

CNS 5278-1984 Basic Rack of Cylindrical Gears with Involute Teeth for Fine Michanics《渐开线圆柱齿轮之基准齿条（精细机械用）》.pdf

CNS 5279-1984 Dimensions of Cylindrical Worm Coordination of Shaft Centre Distances and Transmission Rations of Worm Drives《圆柱蜗杆之尺度及蜗杆传动机构轴中心距与转速比之配合》.pdf

CNS 5280-1984 Helix Angles for Cylindrical Gears《圆柱齿轮之螺旋角》.pdf

CNS 5281-1984 Deviations of Centre Distance and Parallelism Tolerances for Axes of Cases for Cylindrical Gears《齿轮箱之圆柱齿轮轴中心距许可差及轴线平行误差之公差》.pdf

CNS 5282-1984 Basic Rack of Gear-Cutting Tools for Involute Tooth System《渐开线齿制用切齿刀具之基准齿条》.pdf

CNS 5283-1984 Accuracy of Cylindrical Gear Teeth Tolerance for Errors of Tooth Trace《圆柱齿轮轮齿之精度（齿廓面元线误差之公差）》.pdf

CNS 5284-1984 Addendum Modification of Spur Gears in the 0 5 System Introduction《0 5齿制正齿轮之齿廓移位》.pdf

CNS 5285-1984 Accuracy of Cylindrical Gear Teeth Tolerance for Errors of Indevidual Parameters《圆柱齿轮轮齿之精度（个别参数误差之公差）》.pdf