CNS 7435-1981 Method of Test for Total Iodine Value of Drying Oils and Their Derivatives《干性油及其衍生物总碘质测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1672-2017 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass.pdf

ASTM C1673-2007e1 Standard Terminology of C26 10 Nondestructive Assay Methods《C26 10无损检验法的标准术语》.pdf

ASTM C1673-2010 Standard Terminology of C26 10 Nondestructive Assay Methods《C26 10无损分析方法标准术语》.pdf

ASTM C1673-2010a Standard Terminology of C26 10 Nondestructive Assay Methods《C26 10无损检测方法标准术语》.pdf

ASTM C1673-2010a(2018) Standard Terminology of C26 10 Nondestructive Assay Methods《C26 10无损检测方法标准术语》.pdf

ASTM C1673-2010ae1 Standard Terminology of C26 10 Nondestructive Assay Methods《C26 10无损试验方法的标准术语》.pdf

ASTM C1674-2008 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures《环境温度下带工业孔隙(蜂窝状孔道)的高级陶.pdf

ASTM C1674-2011 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures《环境温度下带工业孔隙(蜂窝状孔道)的高级陶.pdf

ASTM C1674-2016 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures《环境温度下工程孔隙率(蜂窝通道)高级陶瓷弯.pdf