CNS 7903-1981 Marine Malleable Iron 16 KGF C㎡ Angle Valves《船用展性铸铁角阀（16KGF／C㎡）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 419-1971 圆偏心轮.pdf

HB 4190-1989 快速核心件.pdf

HB 4191-1989 垂直快速压紧件.pdf

HB 4192-1989 硬质合金带前后引导机用扩孔钻d=7.5~18mm.pdf

HB 4193-1989 硬质合金带前后引导机用扩孔钻d=18.5~40mm.pdf

HB 4194-1989 硬质合金套式机用扩孔钻d=37.5~80mm.pdf

HB 4195-1989 带前后引导的刀杆（用于硬质合金套式机用扩孔钻和加工淬火钢硬质合金套式机用铰刀 d=37.5~80mm.pdf

HB 4196-1989 硬质合金机用扩孔钻技术条件.pdf

HB 4197-1989 加工淬火钢硬质合金带前后引导机用铰刀d=7.7~25mm.pdf