CNS 7905-1981 Marine Forged Steel 40 KGF C㎡ Angle Valves《船用锻钢角阀（40KGF／C㎡）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 02FTM7-2002 Selecting the Best Carburizing Method for the Heat Treatment of Gears《齿轮的热处理用最优渗碳方法的选择》.pdf

AGMA 02FTM8-2002 Compliant Spindles in Lapping and Testing Machines《研磨和试验机的兼容纱锭》.pdf

AGMA 02FTM9-2002 Gear RollScan for High Speed Gear Measurement《高速齿轮测量用齿轮滚动扫描》.pdf

AGMA 02FTMS1-2002 Design and Stress Analysis of New Version of Novikov-Wildhaber Helical Gears《Novikov-Wildhaber螺旋齿轮新版本的设计和应力分析》.pdf

AGMA 04FTM1-2004 Gear Noise - Challenge and Success Based on Optimized Gear Geometries《齿轮噪音.基于最优化齿轮几何学的挑战和成效》.pdf

AGMA 04FTM10-2004 The Failure Investigation and Replacement of a Large Marine Gear《大型船用齿轮的故障调查和更换》.pdf

AGMA 04FTM11-2004 Gear Lubrication as a Reliability Partner《作为可靠性合作伙伴的齿轮传动装置润滑》.pdf

AGMA 04FTM12-2004 Improved Tooth Load Distribution in an Involute Spline Joint Using Lead Modifications Based on Finite Element Analysis《基于有限元素分析用铅修正的渐开线花键连接中改良的轮齿负载分配》.pdf

AGMA 04FTM13-2004 Superfinishing Motor Vehicle Ring and Pinion Gears《超级研磨汽车用环齿轮和小齿轮》.pdf