CNS 8350-1984 Punched Tape Variable Block Format for Positioning and Straight - Cut Numerically Controlled Machine Tools《数值控制工具机孔带用可变段格式（定位及直线切削控制用）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 14630-2002 Structural coniferous sawn lumber《针叶树结构用制材》.pdf

CNS 14631-2002 Structural sawn lumber used in platform construction《框组壁工法结构用制材》.pdf

CNS 14632-2002 Finger joined structural lumber used in platform construction《框组壁工法结构用纵接材》.pdf

CNS 14633-2002 Grading rules of softwood lumber used in platform construction by machine stress rating《框组壁工法结构用针叶树制材之静曲应力分等》.pdf

CNS 14634-2002 Mechanical-shock fragility testing method for products for packaging design《包装设计的制品之冲击强度试验法》.pdf

CNS 14635-2002 Geometric accuracy of machines operating under no-load or finishing conditions《无负载或精加工情况下工具机运转之几何精度》.pdf

CNS 14636-2002 Determination of accuracy and repeatability of positioning of numerically controlled machine tools《数值控制工具机定位精度暨重现性检验通则》.pdf

CNS 14637-2002 Circular tests for numerically controlled machine tools《数值控制工具机圆弧检验通则》.pdf

CNS 14638-2002 Methods of test for total organic carbon in highly purified water《超纯水中有机碳﹝TOC﹞之试验法》.pdf