CNS 8468-1982 Running Test on Radial Plain Bearings General《径向滑动轴承运转试验通则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4656-25-1980 Accuracy of machine tools and methods of test - Gear planing machines《机床精度及试验方法 第25部分 刨齿机》.pdf

BS 4656-26-1980 Accuracy of machine tools and methods of test - Gear shaping machines《机床精度及试验方法 第26部分 插齿机》.pdf

BS 4656-28-1988 Accuracy of machine tools and methods of test - Specification for numerically controlled turning machines up to and including 1500 mm turning diameter《机床精度及试验方法 第28.pdf

BS 4656-29-1981 Accuracy of machine tools and methods of test - Specification for automatic lathes multi-spindle (indexing drum) type《机床精度及试验方法 第29部分 多轴(分度回轮)自动车床规范》.pdf

BS 4656-3-1971 Specification for the accuracy of machine tools and methods of tests - Milling machines knee and column type horizontal or vertical spindle plain《机床精度及试验方法 第3部分 卧式或立.pdf

BS 4656-34-1985 Accuracy of machine tools and methods of test - Specification for power presses mechanical open front type《机床精度及试验方法 第34部分 机械的开式机动压力机规范》.pdf

BS 4656-35-1987 Accuracy of machine tools and methods of test - Specification for capstan turret and automatic lathes single spindle type less than 25 mm diameter capacity《机床精度及试验方.pdf

BS 4656-36-1987 Accuracy of machine tools and methods of test - Specification for plano-milling machines portal type《机床精度及试验方法 第36部分 龙门铣床规范》.pdf

BS 4656-38-1995 Accuracy of machine tools and methods of test - Specification for surface finish of test pieces《机床精度和试验方法 第38部分 试样表面精整规范》.pdf