CNS 8485-1985 Method of Test for Control Cables for Motor - Cycle《两轮机车用操纵线检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G180-2004 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete《混凝土中钢用腐蚀抑制混合料的初始筛分的标准试验方法》.pdf

ASTM G180-2007 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete《混凝土钢材用防腐蚀掺和剂的初筛用标准试验方法》.pdf

ASTM G180-2013 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries《使用胶结泥浆极化电阻测定混凝土中钢的腐蚀抑制混合料的标准试验方法》.pdf

ASTM G181-2004 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程》.pdf

ASTM G181-2004(2009) Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程》.pdf

ASTM G181-2011 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准试验方法》.pdf

ASTM G181-2011(2017) Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准试验方法》.pdf

ASTM G182-2006 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings《测定滚动体轴承破裂摩擦特性的标准试验方法》.pdf

ASTM G182-2013 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings《测定滚动体轴承破裂摩擦特性的标准试验方法》.pdf