CNS 8508-1986 Operation Standard for Chromiumplating on Zinc Alloys《锌合金底材电镀铬作业方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B306-2009 Standard Specification for Copper Drainage Tube (DWV)《铜排水管(DWV)用标准规范》.pdf

ASTM B306-2013 Standard Specification for Copper Drainage Tube (DWV) 《铜排水管(DWV)标准规格》.pdf

ASTM B308 B308M-2002 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles《6061-T6型铝合金结构型材标准规范》.pdf

ASTM B308 B308M-2010 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles《6061-T6型铝合金标准结构轮廓用标准规范》.pdf

ASTM B311-1993(2002)e1 Test Method for Density Determination for Powder Metallurgy (P M) Materials Containing Less Than Two Percent Porosity《含低于2%孔隙率的粉末冶金材料密度测定的试验方法》.pdf

ASTM B311-2008 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity《孔隙度小于2％的粉末冶金材料密度的标准试验方法》.pdf

ASTM B311-2013 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity《孔隙度小于2%的粉末冶金材料密度的标准试验方法》.pdf

ASTM B311-2017 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity《孔隙度小于2%的粉末冶金(PM)材料密度的标准试验方法》.pdf

ASTM B312-1996(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens《金属粉末密压试样未烧结强度的标准试验方法》.pdf