1、UDC 669.14-122.4-423 DEUTSCHE NORM March 1994 Hot rolled I and H sections (IPE series) Dimensions, mass and static parameters I 1025 I Pari 6 Warmgewalzte I-Trger: mittelbreite I-Trger, IPE-Reihe; MaBe, Masse, statische Werte This standard, together with DIN EN 10 034, supersedes March 1965 edition.
2、 In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Dimensions in mm 1 This standard specifies hot rolled I and H sections (“ sections, for short) that have parallel flanges and
3、narrower flanges than the sections specified in DIN 1025 Pari 2 (IPE series), preferably made from DIN EN 10 025 steel. Such sections have a height from 80 to 600 mm. This standard does not cover: Scope and field of application a) hot rolled I sections (I series, with a smaller ratio of flange width
4、 to web height: cf. DIN 1025 Part 1); b) hot rolled I and H sections (IPE and IB series, with thicker webs and flanges andlor tapered flanges; cf. DIN 1025 Part 2); c) hot rolled I and H sections (IPBI series, with thin webs and flanges, but shorter; cf. DIN 1025 Part 3): d) hot rolled I and H secti
5、ons (IPBv series, with thicker webs and flanges; cf. DIN 1025 Part 4). 2 Designation Y I The standard designation shall give, in the following order: a) name of product (H section): b) DIN number (DIN 1025); c) material designation or number; ci) section symbol in accordance with table 1. EXAMPLE: A
6、 hot rolled H section complying with this standard (IPE series), made from steel grade S235JR (material number 1.0037) as specified in DIN EN 10025, with a height, h, of 360 mm shall be designated: H section DIN 1025 - S235JR - EPE 360 or H section DIN 1025-1.0037-IPE 360 Continued on pages 2 and 3.
7、 !uth Verlag GmbM Berlin. has the exclusive right of sale for German Standards (DIN-Normen). DIN 7025 Part 5 Engl. Price group Sates NO. 01 05 94 Page 2 DIN 1025 Part 5 Table 1 : Dimensions, mass and static parameters for H sections (IPE series) Dimensions for Static parameters) 3 Dimensions and mas
8、s 4 Tolerances on shape and dimensions 3.1 ified in table 1. 3.2 The nominal length shall be specified at the time of 5 Material ordering. 3.3 The values of mass specified in table 1 have been cal- culated taking the density as 7,85 kg/dm3. Hot rolled H sections shall have the dimensions spec- The d
9、imensions of sections are subject to the tolerances specified in DIN EN 10 034. Sections shall preferably be made from DIN EN 10 025 steel, the particular steel grade being specified at the time of ordering. DIN 1025 Part 5 Page 3 Standards referred to DIN EN 10 025 DIN EN 10 034 Hot rolled unalloye
10、d structural steel products: technical delivery conditions Structural steel I and H sections; tolerances on shape and dimensions Other relevant standards DIN 1025 Part 1 DIN 1025 Part 2 DIN 1025 Part 3 DIN 1025 Part 4 Steel sections; hot rolled I beams; dimensions, mass, limit deviations and static
11、values Hot rolled I and H sections (IPB and IB series); dimensions, mass and static parameters Hot rolled I and H sections (IPBL series); dimensions, mass and static parameters Hot rolled I and H sections (IPBv series); dimensions, mass and static parameters Previous editions DIN 1025 Part 5: 07.59.
12、03.65. Amendments In comparison with the March 1965 edition, the following amendments have been made. a) All specifications with regard to tolerances have been deleted, a reference being made instead to DIN EN 10 034. b) The references to standards have been updated. Explanatory notes With the publi
13、cation of European Standard EN 10 034, it became necessary to revise the DIN Standards on 1 and H sections. Since the European Standard deals with tolerances on shape and dimensions, the scope of the present standard has been restricted to nominal sizes and the associated static parameters, these ha
14、ving been taken without revision from the previous edition. At the European level, ECISSTTC 11 is currently reviewing standardized sizes for sections and bearing piles with parallel flanges. Upon publication of the relevant European Standard, DIN 1025 Parts 2 to 5 will be withdrawn. International Patent Classification F 16 S 003100 E 04 B 001124 E 04 C 003104
