1、DEUTSCHE NORM November 1999 General purpose IS0 metric screw threads Part 4: Nominal sizes for 0,751 mm fine pitch threads with diameters from 5 mm to 11 O mm DIN - 13-4 ICs 21.040.10 Supersedes December 1986 edition. Metrisches ISO-Gewinde allgemeiner Anwendung - Teil 4: Nennmae fr Feingewinde mit
2、Steigung 0,75 mm - Gewinde-Nenndurchmesser von 5 mm bis 110 mm In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Foreword This standard has been prepared by Technical Committee
3、Gewinde of the Normenausschu Technische Grundlagen (Fundamentals in Technology Standards Committee). The adoption of a number of IS0 Standards (e.g. IS0 724, IS0 965 series) as national standards led the responsible committee to revise the DIN 13 series of standards, The nominal sizes are now based
4、both on the basic dimensions specified in DIN IS0 724 and on the nominal profiles specified in DIN 13-19. The nominal sizes of the external thread minor diameters specified here have been calculated taking the root radius as being equal to H/6. The thread designation is to be found in DIN IS0 965-1.
5、 See the table in the Explanatory notes of DIN 13-1 for an overview of DIN and DIN IS0 Standards for screw threads. Amendments This standard differs from the December 1986 edition in that the nominal sizes are now to be calculated on the basis of DIN 13-1 9 and size 7 mm threads have been assigned t
6、o series 2 (cf. table 1). Previo us edit ions DIN 13-35: 1961 -01,1962-1 O, 1964-06; DIN 51 8: 1923-1 O, 1943-09,1952-12; DIN 13-4: 1970-04, 1986-1 2. All dimensions are in mm. 1 Scope This standard applies to general purpose IS0 metric screw threads. It specifies the nominal sizes for 0,75 mm fine
7、pitch threads with diameters from 5 mm to 11 O mm having the basic profile specified in DIN ISO68-1 and the nominal profile specified in DIN 13-19. 2 Normative references This standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cit
8、ed at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edi
9、tion of the publication referred to applies. DIN 13-19 General purpose IS0 metric screw threads - Nominal profiles DIN 13-21 General purpose IS0 metric screw threads - Limits of size for 1 mm to 24,5 mm diameter fine pitch threads with preferred tolerance classes DIN 13-22 General purpose IS0 metric
10、 screw threads - Limits of size for 25 mm to 52 mm diameter fine pitch threads with preferred tolerance classes DIN 13-23 General purpose IS0 metric screw threads - Limits of size for 53 mm to 11 O mm diameter fine pitch threads with preferred tolerance classes Continued on pages 2 to 4. Translation
11、 by DIN-Sprachendienst. In case of doubt, the German-language original should be consulted as the authoritative text. No pari of this translation may be reproduced without the prior permission of Ref. No. DIN 13-4 : 1999-1 V Deutsches Institut fur Normung e. V., Berlin. Luth Verlag GmbH, D-10772 Ber
12、lin, has the exclusive right of sale for German Standards (DIN-Normen). English price group O7 Sales No . 0107 04.00 Page 2 DIN 13-4 : 1999-1 1 DIN 2244 DIN IS0 68-1 General purpose IS0 screw threads - Basic profile - Part 1: Metric screw threads DIN IS0 724 DIN IS0 965-1 Screw threads - Terminology
13、 (IS0 68-1 : 1998) General purpose IS0 metric screw threads - Basic dimensions (IS0 724 : 1993) General purpose IS0 metric screw threads - Tolerances - Part 1 : Principles and basic data (IS0 965-1 : 1998) 3 Concepts See DIN 2244. 4 Dimensions and designation Nominal sizes shall be as shown in figur
14、e 1 and given in table 1. Choose series 1 diameters, series 2 diameters, or series 3 diameters (in order of preference). Screw threads with series 4 diameters are for special industrial applications only. Basic dimensions shall be as specified in DIN IS0 724, tolerances as in DIN IS0 965-1 and limit
15、s of size as in DIN 13-21 to DIN 13-23. P=0,75 Internal thread I I H 6 l) R =-; the root profile may have a non-reversing curvature (cf. DIN IS0 965-1) Figure 1 : Nominal thread profile IS0 metric screw threads shall be designated in accordance with DIN IS0 965-1. Page 3 DIN 13-4 : 1999-1 1 Table 1:
16、 Nominal diameter, d (= O) Series 1 Series 2 Series 3 Series 4 5 6 5,5 6,s 7,5 7 8 8,s 9 9,5 10,5 11 11,5 10 12 12,5 13 13,5 14 14,5 15 16 17 18 19 21 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Nominal sizes Pitch diameter, Minor diameters, d3 Dl d2 (= 02) 4,513 4,080 4,188 5,013 4,580
17、 4,688 5,513 5,080 5,188 6,013 5,580 5,688 6,513 6,080 6,188 7,013 6,580 6,688 7,513 7,080 7,188 8,013 7,580 7,688 8,513 8,080 8,188 9,013 8,580 8,688 9,513 9,080 9,188 10,013 9,580 9,688 10,513 10,080 10,188 11,013 10,580 10,688 11,513 11,080 11,188 12,013 11,580 11,688 12,513 12,080 12,188 13,013
18、12,580 12,688 13,513 13,080 13,188 14,013 13,580 13,688 14,513 14,080 14,188 15,513 15,080 15,188 16,513 16,080 16,188 17,513 17,080 17,188 18,513 18,080 18,188 19,513 19,080 19,188 20,513 20,080 20,188 21,513 21,080 21,188 22,513 22,080 22,188 23,513 23,080 23,188 24,513 24,080 24,188 25,513 25,080
19、 25,188 26,513 26,080 26,188 27,513 27,080 27,188 28,513 28,080 28,188 29,513 29,080 29,188 30,513 30,080 30,188 31,513 31,080 31,188 32,513 32,080 32,188 33,513 33,080 33,188 34,513 34,080 34,188 35,513 35,080 35,188 36,513 36,080 36,188 37,513 37,080 37,188 38,513 38,080 38,188 (continued) Page 4
20、DIN 13-4 : 1999-1 1 97,513 99,513 1 01,513 104,513 107,513 109,513 Table 97,080 97,188 99,080 99,188 1 01,080 101,188 104,080 104,188 107,080 107,188 109,080 109,188 1 (concluded) Nominal diameter, d (= O) Pitch diameter, d2 (= 02) Minor diameters, d3 I Dl 39,513 40,513 41,513 39,080 40,080 41,080 3
21、9,188 40,188 41,188 42,513 43,513 44,513 42,080 43,080 44,080 42,188 43,188 44,188 45,513 46,513 47,513 45,080 46,080 47,080 45,188 46,188 47,188 48,513 49,513 50,513 48,080 49,080 50,080 48,188 49,188 50,188 51,513 52,513 53,513 51,188 52,188 53,188 51,080 52,080 53,080 54,080 55,080 56,080 54,513
22、55,513 56,513 54,188 55,188 56,188 57,513 58,513 59,513 57,080 58,080 59,080 57,188 58,188 59,188 60,513 61,513 62,513 60,080 61,080 62,080 60,188 61,188 62,188 63,513 64,513 65,513 63,080 64,080 65,080 63,188 64,188 65,188 66,513 67,513 68,513 66,080 67,080 68,080 66,188 67,188 68,188 69,513 71,513 74,513 69,080 71,080 74,080 69,188 71,188 74,188 75,513 77,513 79,513 75,080 77,080 79,080 75,188 77,188 79,188 81,513 84,513 87,513 81,080 84,080 87,080 81,188 84,188 87,188 89,513 91,513 94,513 89,080 91,080 94,080 89,188 91,188 94,188