DIN 16888-1-1989 Determination of chemical resistance of thermoplastics pipes polyolefin pipes《热塑性塑料管道化学阻抗的测定 第1部分 聚烯烃管道》.pdf

相关资源

JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定.pdf

JIS K7039-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下长期最终弯曲应力的测定和长期最终相应环偏移度的计算.pdf

JIS K7042-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.粘合的或绕接的钢性接头设计的检定试验方法.pdf

JIS K7035-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下蠕变因子的测定和长期特定环硬度的计算.pdf

JIS K7031 2003 塑料管道系统.玻璃增强热塑(GRP)管道和配件.在短期内压下管壁的渗透密封性验证试验方法.pdf

GA 304-2012 塑料管道阻火圈.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

YD 5025-1996 长途通信光缆塑料管道工程设计暂行技术规定.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

QB T 2568-2002 硬聚氯乙烯（PVC-U）塑料管道系统用溶剂型胶粘剂.pdf

猜你喜欢

ASTM C1806-2014 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants《测量气溶胶泡沫密封剂的流动率的标准试验方法》.pdf

ASTM C1807-2015 Standard Guide for Nondestructive Assay of Special Nuclear Material (SNM) Holdup Using Passive Neutron Measurement Methods《采用无源中子测量法对特种核材料 (SNM) 的滞留量进行无损分析的标准指南》.pdf

ASTM C1809-2015 Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retar.pdf

ASTM C1809-2016 Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retar.pdf

ASTM C181-2003 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories《耐火粘土和高铝塑性耐火材料可加工性指数的标准试验方法》.pdf

ASTM C181-2009 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories《高铝塑性耐火材料和耐火粘土的可塑系数的标准试验方法》.pdf

ASTM C181-2011 Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics《耐火土和高铝质耐火塑料的可塑性指数的标准试验方法》.pdf

ASTM C181-2011(2018) Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics.pdf

ASTM C1812 C1812M-2015e1 Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests《纤维增强混凝土梁试验中使用的径向轴承支承的设计标准实施规程》.pdf