DIN 16964-1988 Wound glass fibre reinforced polyester resins (UP-GF) pipes general quality requirements and testing《绕制玻璃纤维增强聚酯树脂管 一般质量要求和试验》.pdf

相关资源

JIS A4110-1989 玻璃纤维增强聚酯造整体式水箱.pdf

JIS A4110-2008 玻璃纤维增强聚酯造整体式水箱(修改件1).pdf

JIS A5701-1995 玻璃纤维增强塑料波纹板.pdf

JIS R3420-1999 玻璃纤维一般试验方法 解释.pdf

JIS A4101-1994 抽水马桶用玻璃纤维增强塑料制污物处理装置结构件.pdf

JIS A5350-1991 玻璃纤维增强的复合管.pdf

JIS A5350-2006 玻璃纤维增强的复合管(修改件1).pdf

JIS A5712-1994 带洗涤槽的玻璃纤维增强塑料浴盆.pdf

JIS F1034-1-2002 小型船舶.船身结构.船材尺寸.第1部分材料标准叠层玻璃纤维增强热固性树脂.pdf

JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定.pdf

猜你喜欢

ASTM F2599-2006 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner《借助反向现场固化衬套的损坏管部分修理标准实施规程》.pdf

ASTM F2599-2016 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner《采用倒置的就地固化衬垫对破损管道进行分段修理的标准实施规程》.pdf

ASTM F2600-2006 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing《控制外径的聚酰胺-11管和管道的电熔合型聚酰胺-11配件的标准规范》.pdf

ASTM F2600-2009 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing《控制外径的聚酰胺-11管和管道的电熔合型聚酰胺-11配件的标准规范》.pdf

ASTM F2600-2009(2013) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing《控制外径的聚酰胺-11管和管道的电熔合型聚酰胺-11配件的.pdf

ASTM F2600-2009(2018) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing《外径控制聚酰胺-11管材用电熔型聚酰胺-11配件标准规范》.pdf

ASTM F2601-2007 Standard Specification for Fire Safety for Candle Accessories《蜡烛附件防火安全用标准规范》.pdf

ASTM F2601-2009 Standard Specification for Fire Safety for Candle Accessories《蜡烛附件防火安全用标准规范》.pdf

ASTM F2601-2012 Standard Specification for Fire Safety for Candle Accessories《蜡烛配件防火安全的标准规格》.pdf