1、ICS 17.040.30; 21.040.10Geometrische Produktspezifikation (GPS) Gewinde-Ausschusslehrdorne Teil 2: Ausschussarbeitslehren,Prf- und Einstelldorne fr Metrisches ISO-Gewinde allgemeinerAnwendung ber 40 mm bis 200 mm Gewinde-NenndurchmesserIn keeping with current practice in standards published by the I
2、nternational Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.ForewordThis standard has been prepared by Technical Committee Gewindeprfung of the NormenausschussTechnische Grundlagen (Fundamentals in Technology Standards Committee).AmendmentsThis standard
3、 differs from the November 1989 edition as follows:a) The terminology has been harmonized with that used in DIN ISO 1502.b) Symbols and details of designation have been changed.c) The standard has been editorially revised.Previous editionsDIN 91510: 1940-05; DIN 91510-7: 1944-07; DIN 2287: 1927-07;
4、DIN 2283-2: 1953-11, 1977-12, 1989-11.Ref. No. DIN 2283-2 : 2001-12English price group 05 Sales No. 010511.02DEUTSCHE NORM December 20012283-2Continued on pages 2 to 4. No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth
5、 Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Geometrical product specifications (GPS)NOT GO workshop screw plug gauges, check plugs andsetting plugs for general purpose ISO metric screw threadswith nominal diameters over 40 mm up to 200 mmTran
6、slation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.SupersedesNovember 1989 edition.All dimensions are in millimetres.1 ScopeThis standard specifies the dimensions and designation for NOT GO screw plug gauges used for checkinggen
7、eral purpose ISO metric screw threads with a basic profile as in DIN ISO 68-1 and a nominal profile asin DIN 13-19, for NOT GO screw and wear check plugs for GO and NOT GO screw ring gauges, and for settingplugs for NOT GO screw calliper gauges.Page 2DIN 2283-2 : 2001-122 Normative referencesThis st
8、andard incorporates, by dated or undated reference, provisions from other publications. These normativereferences are cited at the appropriate places in the text, and the titles of the publications are listed below. Fordated references, subsequent amendments to or revisions of any of these publicati
9、ons apply to this standardonly when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies.DIN 13-19 General purpose ISO metric screw threads Nominal profilesDIN 2239 Gauges for use in dimensional metrology Requirements and testi
10、ngDIN 2240-2 Geometrical product specifications (GPS) Gauge handles for gauging members over 40 mmnominal diameter Handles, fixing screws and locking prongsDIN 2279 Geometrical product specifications (GPS) Gauges for internal and external ISO metric screwthreads Overview of types, marking and applic
11、ationDIN 2284-2 Geometrical product specifications (GPS) NOT GO screw gauging members for workshopplug gauges, check plugs and setting plugs for ISO metric screw threads with nominal diametersover 40 mm up to 200 mmDIN ISO 68-1 General purpose ISO screw threads Basic profile Part 1: Metric screw thr
12、eads(ISO 68-1 : 1998)DIN ISO 1502 ISO general-purpose metric screw threads Gauges and gauging (ISO 1502 : 1996)3 Dimensions and designation3.1 DimensionsNOT GO screw plug gauge dimensions shall be as given in figure 1 and tables 1 to 3.Key to figure1 NOT GO screw gauging member as in DIN 2284-22 Gau
13、ge handle as in DIN 2240-23 Hexagon socket head cap screw as in DIN 2240-2Figure 1: NOT GO screw plug gauge dimensions (notation)3.2 DesignationDesignation of a NOT GO screw plug gauge designed to check an M60 thread made to 8H tolerance:Gauge DIN 2283 M60 8HDesignation of a NOT GO check plug (NOT G
14、O) for inspecting a new solid GO screw ring gauge (G) designedto check an M60 thread made to 8g tolerance:Check plug DIN 2283 NOT GO G M60 8gDesignation of a NOT GO check plug (NOT GO) for inspecting a new solid NOT GO screw ring gauge (A)designed to check an M52 G180 2 thread made to 6g tolerance:C
15、heck plug DIN 2283 NOT GO A M52 c233 26gPage 3DIN 2283-2 : 2001-12Designation of a wear check plug (Ap) for inspecting a solid or adjustable GO screw ring gauge (G) designed tocheck an M42 thread made to 6g tolerance:Check plug DIN 2283 Ap G M42 6gDesignation of a wear check plug (Ap) for inspecting
16、 a solid or adjustable NOT GO screw ring gauge (A) designedto check an M52 thread made to 8g tolerance:Check plug DIN 2283 Ap A M52 8gDesignation of a setting plug (set) for inspecting an adjustable NOT GO screw calliper gauge (NOT GO) designedto check an M60 G180 2 thread made to 8g tolerance:Setti
17、ng plug DIN 2283 set NOT GO M60 c233 28gTable 1: Gauge handle dimensionsOver 040 up to 062Over 062 up to 120Over 120 up to 200Nominal diameter,d1Gauge handleas inDIN 2240-2Hexagon sockethead cap screwas in DIN 2240-2Table 2: Length l (coarse pitch thread)From 42 0to 48From 52 0to 600000 64 and 68Nom
18、inaldiameter,d1l(approx.)Table 3: Length l (fine pitch thread)From 042 to 050From 052 to 062From 063 to 080From 082 to 100From 102 to 120From 122 to 150From 152 to 160From 162 to 200Nominaldiameter,d1Approximate length,l,for a pitch ofPage 4DIN 2283-2 : 2001-124 RequirementsPlug gauges shall comply
19、with the technical delivery conditions specified in DIN 2239, their marking being asspecified in DIN 2279.Other relevant standardsDIN 2283-1 Geometrical product specifications (GPS) NOT GO workshop screw plug gauges, check plugsand setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mmto 40 mmDIN 2283-3 Geometrical product specifications (GPS) NOT GO workshop screw plug gauges and checkplugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use inprecision engineering
