DIN 27167-1987 Electrical and air-conditioning equipments on railway vehicles battery housings principal dimensions design《有轨车辆电气设备和空调设备 蓄电池箱 主要尺寸 结构》.pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

BS EN ISO 3452-3-2013 Non-destructive testing Penetrant testing Reference test blocks《无损检测 渗透检测 参考试块》.pdf

BS EN ISO 3452-4-1999 Non-destructive testing - Penetrant testing - Equipment《无损检验 渗透检验 设备》.pdf

BS EN ISO 3452-5-2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C《无损检验 渗透测试 温度高于50℃条件下的渗透试验》.pdf

BS EN ISO 3452-6-2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C《无损检验 渗透测试 温度低于10℃时的渗透测试》.pdf

BS EN ISO 3457-2008 Earth-moving machinery - Guards - Definitions and requirements《土方机械 挡板 定义和要求》.pdf

BS EN ISO 3458-2015 Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under internal pressure《塑料管系统 配件和压力管之间的机械接头 内部压力条件下的.pdf

BS EN ISO 3459-2015 Plastic piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under negative pressure《塑料管系统 配件和压力管之间的机械接头 负压条件下的密封性.pdf

BS EN ISO 3471-2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements《土方机械 倾翻保护结构 实验室试验和性能要求》.pdf

BS EN ISO 3493-2014 Vanilla Vocabulary《香子兰 词汇》.pdf